logo

Location

Blaaksedijk 30
4793RN, Fijnaart
the Netherlands

Office hours

Mon – Fri 8:00 – 17:00
Sat – Sun – Closed

Call us Today

+31 168 464461

logo

Call us Today

+31 168 464461

Comec resurfacing machines

Here you will find an overview of all our Comec resurfacing machines
Contact

Comec Resurfacing machines

Comec resurfacing machines - SPN800

SPN800 Easy Belt resurfacer

The SPN800 belt surfacer is the cheapest and most effective way to resurface engine parts.

Comec resurfacing machines - RP330

RP330 Head and block resurfacer

The RP330 resurfacer is used for the resurfacing of aluminium and cast iron heads of engines.

Comec resurfacing machines - RP850

RP850 Head and block resurfacer

The experience in resurfacing cast iron and aluminium at high speed, by using special tools like CBN or PCD.

Comec resurfacing machines - RP1000

RP1000 Head and block resurfacer

The RP1000 is a resurfacing machine for cylinder heads and blocks of cars and trucks.

Comec resurfacing machines - RP1000CNC

RP1000CNC Head and block resurfacer

The RP1000CNC is a CNC controlled resurfacer for cylinder heads and engine blocks of cars and trucks.

Comec resurfacing machines - RP1300

RP1300 Head and block resurfacer

The RP1300 is a resurfacing machine for cylinder heads and blocks of cars and trucks.

Comec resurfacing machines - RP1400CNC

RP1400CNC Head and block resurfacer

The RP1400CNC is a resurfacing machine for cylinder heads and engine blocks of cars and trucks.

Comec SPN800 Easy Belt resurfacer

SPN800 Easy Belt resurfacer

The SPN800 belt surfacer is the cheapest and most effective way to resurface engine parts.

Comec RP330 Head and block resurfacer

RP330 Head and block resurfacer

The RP330 resurfacer is used for the resurfacing of aluminium and cast iron heads of engines.

Comec RP850 Head and block resurfacer

RP850 Head and block resurfacer

The experience in resurfacing cast iron and aluminium at high speed, by using special tools like CBN or PCD.

Comec RP1000 Head and block resurfacer

RP1000 Head and block resurfacer

The RP1000 is a resurfacing machine for cylinder heads and blocks of cars and trucks.

Comec RP1000CNC Head and block resurfacer

RP1000CNC Head and block resurfacer

The RP1000CNC is a CNC controlled resurfacer for cylinder heads and engine blocks of cars and trucks.

Comec RP1300 Head and block resurfacer

RP1300 Head and block resurfacer

The RP1300 is a resurfacing machine for cylinder heads and blocks of cars and trucks.

Comec RP1400CNC resurfacing machine

RP1400CNC Head and block resurfacer

The RP1400CNC is a resurfacing machine for cylinder heads and engine blocks of cars and trucks.

Comec Resurfacing machines

Comec resurfacing machines are known throughout the world as the most reliable, robust and accurate resurfacing machines available.
Read more...

No matter what kind of engine overhaul you do in your workshop; stock, performance, diesel, marine, etc., you must have the ability to surface cylinder heads and engine blocks. The surfaces on heads and blocks with a high mileage are often corroded or bend, especially if the engine has once been overheated and has had a leaky head gasket. 

Machining and finishing of cylinder heads and engine blocks is usually necessary to restore flatness. Often both are needed for the later models that use Multi Layer Steel head gaskets. For new blocks and cylinder heads, it is also necessary to obtain the correct height and piston distance to achieve the correct compression ratio.

Given that machining surfaces are a requirement, the question is what type of surfacing equipment you need for head and block machining. Grinders and belt sanders are very old-fashioned compared to the needs of today’s engines. Wet grinding can achieve high-quality surface finishes.

Almost all our machines can be equipped with a set of segment stones for wet grinding.

However, wet grinding is a messy process compared to dry milling. It also works better with cast iron. Aluminum tends to block the stones. Dry milling is a relatively fast, clean process that can deliver consistent, high-quality finishes.

Comec surface machines are among the best surface machines in the world and offer a high-quality finish with easy to operate characteristics.

We recommend the use of CBN bits on cast iron and PCD bits on aluminum.

All our machines offer a high structural rigidity, due to a robust, heavy and sturdy construction, so that a extremely accurate finishing is assured.
Accuracies up to 0.01 mm are very realistic.

We can help you find the right machine for every resurfacing application, because we produce the machines ourselves in our Comec Machines factory in Italy.
Of course we also help you with the Comec consumer articles for our resurfacing machines. 

Because we find personal contact with our customers very important, we also communicate about improvements to our machines. This is very important to us, because this way we can continue to perform our leading role in the market. 

Get in touch

For more information, you can also visit our other website www.ftfmachines.com